JRC JLN-720 - SOG and STW Selection (for Remote Display)

To Next Page

To Previous Page

Chapter 4 Menu Settings and Configurations 4-26

4.3.14 SOG and STW selection (for remote display)

The SOG and STW of the remote display can be selected in this menu. (Connection to Doppler Log is

necessary to some selections.)

1. Touch the [SOG/STW] button in the main menu of remote display.

2. SOG/STW setting screen is then displayed. Touch the [-]/[+] buttons to switch the SOG

and STW of the remote display

GNSS SOG: Display the vessel speed over ground from the GPS compass sensor.

DOPPLER SOG: Display the vessel speed over ground from the Doppler.

DOPPLER STW: Display the vessel speed through water from the Doppler.

3. Confirm the setting and close the [SOG/STW] menu by touching the

button.