JRC JLN-720 - Advanced Settings; Setting the Number of Decimal Digits of a Ship Speed

4-11 Chapter 4 Menu Settings and Configurations
4
4.3.5 Advanced Settings
This menu is for the engineers who are engaged in the installation of this equipment.
This menu is not used by general users.
4.3.6 Setting the number of decimal digits of a
ship speed
The number of decimal digits can be set for the ship speed that is displayed on the normal screen.
1. Touch the [DIGITS] button on the main menu.
A screen for setting the number of decimal digits is displayed.
2. Set the number of decimal digits by touching the [-]/[+] buttons.
2: Displays two decimal digits (default value).
1: Displays one decimal digit.
3.
Close the menu by touching the button.