JRC JLN-720 - Page 63

4-3 Chapter 4 Menu Settings and Configurations
4
The main menu is displayed.
Main Display NWZ-510SDG Remote Display NWZ-650SDR (Optional)
Remote Display NWZ-840SDR (Optional)
The function of each menu is listed below.
Menu
Function
[TOUCH CAL] (Touch position calibration)
Calibrates so that the position touched corresponds to
the intended button.
[ROT RANGE]
(Rate of turn scale display range setting)
Selecting the rate of turn scale range that is displayed
on the touch panel.
[THEME] (Brightness adjustment)
Changes the brightness of the touch panel according to
the ambient brightness.
[ABOUT](Information on this equipment)
Displays the information relating to this equipment such
as the software version.
[ADV SET] (Advanced setting)
Menu for relevant engineers only.
This function is not used by general users.
[DIGITS]
(Number of speed indication digits)
Selecting the number of digits for ship speed indication.
[UNITS] (Unit setting)
Selecting the unit for ship speed.
[GNSS SET] (GNSS system setting)
Displays the inform
ation and settings of the Global
Navigation Satellite System.
[ADV SDME]
(Advanced setting of this equipment)
Menu for relevant engineers only
This function is not used by general users.
[ALERT LIST] (Alert list) Displays the list of current alerts.
[ALERT HIST] (Alert history) Displays the history of all alerts that occurred.
Main menu
Main menu