3.8 DISPLAY NAVIGATION INFORMATION (NEW INFORMATION DISPLAY)
3ņ94
3
y
y y
[II] Loading navigation information (Load User Map)
Procedure 1 Press [2] key while the User Map
Setting Menu is open.
The Load User Map Menu will appear.
2 Press [2] key.
The list of navigation information files saved in
the system will appear.
* Each time you press [1] key, the Device item is switched between
INTERNAL and CARD2.
INTERNAL: Reads saved data from the processor.
CARD2: Reads saved data from CARD2.
To select CARD2, insert the flash memory card, in which data has
been saved, into card slot 2 (upper stage).
3 Select the number of the file to be
loaded, pressing the numeric key.
The selected navigation information will be
loaded and shown on the radar display.
To Next Page
Loading...
