5.1 PREPARATION
ņ2
5
yy
yyy
5.1 PREPARATION
This section explains the features of the target tracking and AIS functions, and the initial setting for using each
function.
Before the target tracking function or AIS function can be used, the corresponding optional device must be
installed.
Target Tracking Function
The target tracking function calculates the course and speed of a target by automatically tracking the
target's move.
The target tracking function enables the automatic acquisition of targets by using the automatic
acquisition zone function.
If the mode is ground stabilization, SOG/COG used for own ship's information in target tracking. If the
mode is sea stabilization, SPD (speed through the water) / HDG (heading) used for own ship's
information in target tracking.
The target tracking function is available when a target tracking unit (option) is installed.
AIS (Automatic Identification System) function
The AIS function shows the target’s information on the radar display, using other ship's information sent
out from the AIS unit.
This function is available when the optional AIS unit is installed.
To Next Page
Loading...
