JRC JMA-5212-4 User Manual

ņ29
7.3.1.4 Transmission Port Setting (TX Port)
For each sentence, set a communication port through which signals are transmitted to sensors.
Procedure 1 Hold down [RADAR MENU] key.
The Code Input Menu will appear.
2 Press [0] key.
3 Move the cursor onto the “ENT” button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
4 Press [5] key.
Press [3] key.
The TX Port Menu will appear.
5 Select the signal you want to set,
pressing the numeric keys [1] to [9].
The Output Port Setting Menu for each signal will appear.
Settable sentences
1. TTM(TT Target)
2. TLL(TT Target)
3. TTD(TT Target)
4. TLB(TT Target)
5. TTM(AIS Target)
6. TLL(AIS Target)
7. TTD(AIS Target)
8. TLB(AIS Target)
Ў
1.
2.
3. OSD
4. RSD
5. ALR
6. AIS
7.
8.
Ў
1. Remote Maintenance
2. NMEA0183 Output Format
3. NMEA0183 Talker
4. NMEA0183 TX Interval
5. APB
6. BOD
7. GGA
8. GLL
Ў
1. RMC
2. RMB
3. VTG
4. XTE
5. BWC

JRC JMA-5212-4 Specifications

General

Brand	JRC
Model	JMA-5212-4
Category	Marine Radar
Language	English