7.5 MAINTENANCE MENU
ņ56
7
yyy
yyyy
7.5.4 Update of Character String Data (String Data Update)
The system is designed to transfer and display external character strings as the second language display. The
second language is factory-set to "Japanese."
Ask our agent or sales department for the supply of character strings to be updated.
To update character strings, the flash memory card (option) containing the character string file must be inserted
in card slot 2.
Procedure 1 Insert a flash memory card containing
character string data into CARD slot 2.
2 Hold down [RADAR MENU] key.
The Code Input Menu will appear.
3 Press [0] key.
4 Move the cursor onto the “ENT” button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
5 Press [2] key.
The Maintenance Menu will appear.
6 Press [7] key.
A dialog appears asking if you wish to load the character string data from Card2.
1 YES : Load data.
2 NO : Cancel.
If YES is selected, the character string file on the flash memory card is read into the
system, and the second language area is updated.
To display the read character strings in the second language, select Other in the menu
shown in Section 7.3.5 “Language Setting (Language)”.
To Next Page
Loading...
Need help?
General
