JRC JMA-5220-7 - Display Navigation Information (Nav Display Setting)

3─75
3.8.2 Display Navigation Information (NAV Display Setting)
The navigation information below can be displayed (ON) or hidden (OFF) individually.
c NAV lines [NAV Line]
―
d Coastlines [Coast Line]
----
e Depth contours [Contour]
‐―
f Mark 1 [Mark 1]
g Mark 2 [Mark 2]
★
h Mark 3 [Mark 3]
+
i Mark 4 [Mark 4]
Y
Procedures 1 Press [RADAR MENU] key.
Press [6] key.
Press [2] key.
The NAV Display Setting Menu will appear.
To determine whether to display each type of
navigation information, press the corresponding
numeric key.
ON : Displays the navigation information.
OFF : Does not display the navigation
information.
NAV Display Setting
1. NAV Line ―
ON
2. Coast Line ----
ON
3. Contour ‐―
ON
4. Mark1
ON
5. Mark2 ★
ON
6. Mark3 +
ON
7. Mark4 Y
ON
0. EXIT