3─103
Trails Erase
1. Trails Erase Mode
OFF
2. Trails Erase Start
3. Eraser Size
3×3
0. EXIT
Erasing the displayed trails partially.
• Erasing the part of the displayed trails by using the cursor as a eraser.
Note: Deleted trails can not be restored, so Erase them carefully.
Procedures 1 Press [RADAR MENU] key twice.
Press [2] key.
Press [9] key.
Press [4] key.
z Trail erase menu will appear.
[1] Trails Erase Mode
Press [1] key.
z Trail erase mode is enabled.
z On the mode, cusor is fixed on the menu,
and the eraser (white box) is displayed on
the own ship positon.
z Using the trackball, positon the eraser on
the Trail to be deleted.
[2] Trails Erase start
Press [2] key.
z Trail erase function starts.
Using the track ball, wipe out trails.
z Press [2] key again to disable the function
temporally.
The depth input scre
[3] Eraser Size
Press [3] key.
z Eraser size lit is displayed.
z Select the size of the eraser.
To Next Page
Loading...
