3─135
• Information saved in the processor is displayed in the Memory Content.
Total: Total number of data points
Track: Number of data points for own ship's track (7000 points maximum)
Remain: Number of remaining data points of own ship's track that can be saved
Mark/Line: Number of mark and line points made with user map (20000 points maximum only
when a plotter option is installed)
Remain: Number of remaining data points of marks and lines that can be saved
WPT: Number of data points of created waypoints (99 points maximum)
Remain: Remaining waypoints that can be saved
Route: Number of data points of created routes (10 routes maximum)
Remain: Remaining routes that can be saved
• File names and information saved in the card is displayed in Card 2.
• Arrows next to Card 2 are used to scroll the contents of Card 2.
Range +/- keys can be used to scroll also.
• Numeric key is used to give a file name.
MEM CAPA/Copy
1. Copy Internal -> Card 2
2. Copy Card 2 -> Internal
3. Copy Card 1 -> Card 2
4. Clear File
0. EXIT
7. Show Card 1
8. Show Card 2
RACK
OVER WRITE
0000
0000
0000
0000
->
4 5 6
1 2 3
7 8 9
- 0 +
CLR ENT
Memory Content
OTAL
TRACK
Remain
MARK/LINE
Remain
WPT
Remain
ROUTE
Remain
CARD Remain
Card 2
0000
To Next Page
Loading...
Need help?
General
