8─97
8 Enter the time.
The time will be set. The multi-function control is also available for the entry.
After having enter the time, press ENT.
9 Press [4] key.
The Code Input Menu will appear.
10 Enter the time difference.
The time difference will be set. The multi-function control is also available for the entry.
After having enter the value, press ENT.
Exit 1 Press [RADAR MENU] key.
The menu will be closed.
z The “ZDA” sentence of NMEA0183 take presedence
of the above setting.
Attention
To Next Page
Loading...
