13-7 Section 13 Setting up the Operation Mode
Page 5
Setting Item Description of Setting Setting Value
Gain Offset Set up the gain offset for sensitivity compensation. -32 to 32
PRF
Set up the operation mode of the transmitter's
repetition transmission frequency.
[Economy] cannot be selected when a solid state
radar antenna is connected. If a solid state radar
antenna is connected while [Economy] is being
selected, the setting will be reset to the default
(factory preset) value.
Normal / Economy /
High Power
Fishnet Detection Turn On/Off the fishnet detection mode. To enable: Select.
To disable: Clear.
Antenna Height Set up the radar antenna height.
When this is set to [Default], the value that has
been set in [Antenna Height] by selecting [Service]
- [Adjustment] - [TXRX] is used.
Default / -5 m /
5-10 m / 10-20 m /
20 m-
Page 6
Setting Item Description of Setting Setting Value
Save as User Settings Data that can be called is saved as the user
default values of the selected observation scene.
-
Load User Settings Load the user default values to the data that can
be called.
-
Initialise Load the data that is set at the factory shipment to
the data that can be loaded.
-
To Next Page
Loading...
