JRC JMR-5410-4X - Page 413

13-41 Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Item saved
Preferences save target Value set at shipment from
factory, value displayed
when the [Default display
configurations] is pressed
Location Item
VRMs
RADAR screen
- EBL/VRM read
information area
VRM1 (VRM2)
• Display On/Off
• Control right
• Distance value
• EBL1/VRM1
measurement
reference point (blank
space/C/D and floating
position. In the case of
C, the information is
stored in the form of
DC coordinate and in
the case of D, the
information is stored in
the form of
latitude/longitude.)
• Unit of VRM distance
(commonly applied to
both VRM1 and
VRM2)
VRM1:
• Display On/Off: On
• Control right: On
• Distance value: 0.25 NM
• EBL1/VRM1
measurement reference
point: Blank space
(CCRP)
• EBL2/VRM2
measurement reference
point: Blank space
(CCRP)
VRM2: Display Off
• Unit of VRM distance:
NM
EBLs RADAR screen
- EBL/VRM read
information area
RADAR screen -
EBL/VRM read
information area
EBL1 (EBL2)
• Display On/Off
• Control right
• Bearing value
• EBL bearing
True/Relative
(commonly applied to
both EBL1 and EBL2)
EBL1
• Display On/Off: On
• Control right: On
• Bearing value: 000.0
EBL2 : Display Off
• EBL bearing
True/Relative: True