JRC JMR-7230-S3 - Section 18 Setting up the Operation Mode; 18.1 Basic Operation of the Settings Dialog Box; 18.2 Basic Settings for Radar Signal Processing; 18.3 Setting Radar Signal Processing

2.13 Setting the Motion Mode
2.13.1 Switching the Motion Mode
1 Select the motion mode from "TM", "RM(T)", and "RM(R)".
The motion mode switches.
2.13.2 Setting Up Own Ship's Position in the "TM"
(True Motion) Mode
1 Click the Motion Mode button of the presentation and mode information.
2 Select "TM Reset" from the list of motion modes.
Own ship's position is reset in the same way as when switching from relative motion display to
true motion display, and own ship starts moving from that position.
Motion Mode Button
16