JRC JMR-7230-S3 - Erasing Tracked Targets

3.3 Erasing Tracked Targets
3.3.1 Erasing One Target At A Time
1 Right click after moving the cursor above the tracked target to be erased.
The context menu will be displayed.
2 Click "Cancel TT" on the Context menu.
The vector symbol of the tracking target disappears and only radar images remain.
3.3.2 Erasing All Targets
1 Right click after moving the cursor above the tracked target to be erased.
2 Click "Cancel all TT" on the Context menu.
The vector symbols of all the tracking targets disappear and only radar images remain.
20