Jrco Tine Rake Dethatcher - 2.3 Tools Required; 2.4 Power Unit Requirements

Operator’s Manual Tine Rake Dethatcher
20195 South Diamond Lake Road, STE 100
Rogers, MN 55374
800.966.8442
www.jrcoinc.com
7
Ref Part No. Description Qty
1 4679.JRC Wheel 1.75 x 8 2
2 4683-2.JRC 5/8” Oilite flange bushing 4
3 4661S.JRC Shaft collar w/set screw 2
4 4673.JRC Yoke 2
6 7282.JRC ½-13 x 3” Hex bolt 2
7 4233.JRC 1/3-13 Two-way locknut 2
8 7247.JRC 5/16-18 Serrated flange nut 16
9 (7389L).JRC
Left wheel brace assembly
w/bushing
1
10 (7389R).JRC
Right wheel brace assembly
w/bushings
1
11 4617.JRC 46” Deck – 35 Tine 1
4617-1.JRC 60” deck – 47 Tine 1
4617-2.JRC 36” Deck -27 Tine 1
13 7232.JRC
5/16-18 x ¾” Serrated flange
bolt
16
14 7251.JRC 1/8 x 1 ½” Cotter pin 4
15
4638-1.JRC
7/8” Machine bushing 4
16 4623.JRC 46” Tine rod 2
4623-1.JRC 60” Tine rod 2
17 4622.JRC 46” Tine tube 2
4622-1.JRC 60” Tine tube 2
18 4621.JRC 46” Stabilizer tube 2
4621-1.JRC 60” Stabilizer tube 2
19 4624DD.JRC Tine Double-double loop 46” 35
Tine Double-double loop 60” 47
20 8231L.JRC Mount Side Plate - Left 1
21 8231R.JRC Mount Side Plate - Right 1
22 8230.JRC Lift Tube 1
23 8235.JRC Hitch Pin 1
24 3045.JRC Hairpin Cotter 1
25 8237.JRC Clevis Pin, 5” 1
26 4110.JRC Circle Cotter 1
27 7873.JRC ¾” Nylon Bushing 2
28 7818.JRC ¾”Machine Bushing 2
2.3 Tools Required
Socket Wrench: ½”, & ¾”
Open or Box End Wrench: ½”, & ¾”
Allen Wrench: 5/32”
2.4 Power Unit Requirements
The Tine Rake Dethatcher is designed to be attached to a JRCO Mount on the 52” or 60” Toro Multi-force stand-
up mower with the hydraulic lift 2” receiver hitch.