Need help?Do you have a question about the JTS CS-8 and is the answer not in the manual?
Power| power supply | 18VDC, 1A |
|---|---|
| power consumption | 18 Watts |
| fuse | 1A 250V |
Electrical Characteristics| voltage output | +4VDC±0.3V |
|---|---|
| phantom power | +48V |
| control voltage | +12V |
Impedance| input impedance (mic) | 4.7KΩ |
|---|---|
| input impedance (line) | 20KΩ |
| output impedance (mic) | 300Ω |
| output impedance (line) | 200Ω |
Audio Performance| maximum output level (line) | >+17 dB |
|---|---|
| maximum gain | ≥70dB |
| frequency response | 35~20, 000 Hz |
| thd% input (1 KHz -50dB) | <0.06% |
| signal-to-noise ratio | >70dB |
Weight and Dimensions| weight | 2.25kg |
|---|---|
| dimensions (length) | 420.6mm |
| dimensions (width) | 198.5mm |
| dimensions (height) | 44.2mm |
Details and functions of the front panel controls including power, levels, and indicators.
Description of rear panel connectors for power supply, signal linking, outputs, and inputs.
Adjusts input sensitivity for microphones using internal switches.
Controls output level reduction, switchable between line and mic levels.
Manages microphone signal levels to maintain low ambient noise in busy setups.
Enables or disables +48V phantom power for condenser microphones.
Switching between MIC1/MIC2 inputs and RCA stereo inputs.
Connecting multiple CS-8 units for expanded microphone input capacity.
Procedure for mounting the mixer into a standard 1U rack space.
To Next Page
