EasyManua.ls Logo

JTS RU-992 - Volume Adjustment

JTS RU-992
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
ATOF: Automatic microphone o countdown under mute status
This function is deactivated.
RFP: RF microphone power
rF Lo 10mW
rF Hi 50mW
OFF This function is deactivated
1 1 minute countdown to turn o
10 10 minute countdown to turn o
30 30 minute countdown to turn o
The transmitter comes with 2 stages of RF power output (as per local regulations).
This shows that the RF output is LOW (10mW).
Volume adjustment
In non-setting mode, adjust the volume from 0 to -31dB using the / button.
The minimum volume is -31 dB.
The maximum volume is 0 dB.
The default setting is -10 dB.
Minimum volume at -31db; maximum volume
at 0dB.
(The default setting is 10 minute.)
rC-FrE Only frequency and group
setting will be synchronized
rC-ALL All data setting will be
synchronized
RC (Remoset Conguration)
(The default setting is rC-FrE.)
Only frequency and group setting will be
synchronized.

Related product manuals