– 73 –
(5) Setting of the skip of steps
Entering the skip setting mode
Press mode changeover button
to select skip setting
mode
.
It is possible to set the skipping of sewing of a given step.
If you want to skip the sewing of a certain step within the combination data, use this function.
Pressing the button of the step to be skipped.
Press button
of the step to display
. The step is set to
"Skip". Another press on the button resets the skip setting. It is
possible to set two or more steps to "Skip".
When all skip button
or all skip reset button
is pressed, the skip can be set for all steps or the skip setting
can be reset for all steps. Note that the sewing screen is not
displayed even by pressing the set ready key when all steps
are set to "Skip".
To Next Page
Loading...
