Adjustment Procedure
1) Z-phase adjustment of a main motor
* When you implement an origin adjustment of various motors, be sure to start with adjustment of a
main motor (Z-phase adjustment).
It is because the phase of various motors is decided by the angle of the main motor.
* For adjustment of various motors, refer to the Section "11 Check program."
The procedure conforms to 1) Z-phase adjustment of a main motor.
1)-1. DDL-9000C-S
❶
❺
❾
❶
❺
❺
1. Turn on the sewing machine while pressing the
❾.
2. After pressing the ❶ to select the "11
Check program," press the ❺ to display the
check program selection screen.
3. After pressing the ❶ to select the "02
Z-phase adjustment," press the ❺ to dis-
play the Z-phase adjustment screen.
4. Turn a handwheel one revolution and align
one marker line with the other marker line. By
pressing the ❺, the current screen returns
to the check program election screen after the
adjusted contents are xed.
画面をご支給ください
画面をご支給ください
– 23 –
To Next Page
Loading...
