vii
SAFETY DEVICES AND WARNING LABELS
In addition, be aware that the safety devices such as the "eye protection cover" and "nger
guard" are sometimes omitted in the sketches, illustrations and gures included in the Instruc-
tion Manual for the explanation's sake. In the practical use, never remove those safety devices.
CAUTION
1
4
2
0
3
*
The mounting location and
shape of the power switch
differs with the place of
destination.
(For CE type)
*3: Supplied with the sewing machine for export in general
*4: Supplied with the sewing machine for China
*5: Supplied with the sewing machine for CE
Warning label
(Refer
to the
warning
label on
page i.)
The label gives the
minimum precau-
tions to be taken
when operating the
sewing machine.
Pulley cover
This is a cover for
preventing entan-
glement of hands,
hair and clothes by
the hand pulley.
Finger guard
This is a cover for
preventing contact
between ngers
and the needle.
Warning label
against pinching
This label indi-
cates that there is
a risk of pinching
ngers under the
control box.
Power switch
This is a switch for disconnecting the power unit
of the sewing machine from the power supply.
Selection of the power switch (EU type)
Be sure to use the IEC60204-1-compliant power
switch with rated current of 20A or more and
short-circuit breaking capacity of 120 A or more.
Warning label
against pinching
This label warns
that ngers or
other parts of
human body can
be pinched in the
thread take-up
lever.
Thread take-up
lever cover
This is a cover for
preventing contact
between the human
body and the thread
take-up lever.
High-voltage
caution label
This label
warns that there
is a high-volt-
age part inside
cover.
Power switch
This is a switch for disconnect-
ing the power unit of the sewing
machine from the power supply.
(Sewing machine for export in
general and for China type)
Warning label against
pinching
This is the caution label
to protect ngers, etc.
from being caught be-
tween the bed and table
during maintenance.
To Previous Page
Loading...
