Fold edge of fabric over about
3mm (1/8 inch), then fold it over
again 3mm (1/8 inch) for about
5cm (2 inches) along the edge
of the fabric.
Insert the needle into the fold by
rotating the handwheel toward
you, and lower the presser foot.
Sew several stitches and raise
the presser foot.
Insert the fabric fold into the
spiral opening of
. Move fabric back and forth
until the fold forms a scroll shape.
rolled hemming
foot
Lower the presser foot and start
sewing slowly guiding the raw
edge of the fabric in front of the
evenly into
the scroll of the foot.
rolled hemming foot
Narrow hemming
* The
accessory is optional. It is not
included with this machine.
rolled hemming foot
K
3.5
1.5~3.0
00
The is
used to stitch the narrow rolled
hems usually found on shirt
tails, table linens and along the
edge of frills.
rolled hemming foot
To Next Page
Loading...
