JUKI IT-20 - (5) Initialization screen

– 13 –
3
(5) Initialization screen
Panel data is initialized on the initialization screen.
Press the
switch
3
on initialization screen and
indicate the initialization No.
The initialization No. can be selected by pressing the
switch
1
or switch
2
in this condition.
0 : Initialization is not executed.
1 : Memory switch and so forth are initialized.
2 : Measurement data is initialized.
3 : Both memory switches and measurement data are
initialized.
Then, press
switch
3
to confirm the selection
and turn the power OFF.
1
2
3