JUKI IT-20 - (8) Version check screen

– 16 –
■
Manual selection of IP address
When IP address has been set up, press the
switch
3
to turn OFF the power supply and restart
the sewing machine.
3
1
2
3
…
(8) Version check screen
The version data for the panel can be checked on the version check screen.
Select the subject to check the version by pressing the
switch
1
or switch
2
on the version check
screen.
1
2
3
Switch the indication in order of R-V-L branch numbers
using the
switch
3
.
When manual input is selected, the IP address input
screen will appear. Select the IP address using the
switch
1
or switch
2
for each block and then
conrm with the
switch
3
.
* The screen will blink during setup.