Need help?Do you have a question about the JUKI KE-2070 and is the answer not in the manual?
General| Number of Nozzles | Up to 12 |
|---|---|
| Width | 1, 500 mm |
| Type | High-speed Chip Mounter |
| Placement Accuracy | ±0.05 mm |
| Component Size | 0402 (0.4 mm x 0.2 mm) to 33.5 mm square |
| Board Size | 50mm x 50mm to 510mm x 460mm (single conveyor) |
| Feeder Capacity | Up to 120 feeders |
| Power Supply | 200V AC, 3-phase, 50/60Hz |
| Air Pressure | 0.5 MPa |
To Next Page
