To Next PageTo Next Page
Need help?Do you have a question about the JUKI KE-2020 and is the answer not in the manual?
General| Component Size | 0402 chip |
|---|---|
| Board Size | L50 x W50mm to L510 x W460mm |
| Power Supply | 50/60 Hz |
| Air Supply | 0.5 MPa or more |
| Type | Modular Mounter |
Outlines steps for installing the main unit, including forklift usage and safety precautions.
Steps to detach covers and air caps before adjusting transport height and leveling for specific models.
Detailed instructions for leveling the machine using adjusters and a level vial.
Locking adjust nuts, tightening bolts, and safety notes for preventing unit movement.
Steps to detach covers before adjusting transport height and leveling for the KE-2030 model.
Instructions for leveling the KE-2030 using adjusters and securing bolts with safety notes.
Instructions for connecting compressed air tubes and setting operating air pressure with cautions.
Steps for connecting the power cord to CE models of KE-2010/2020/2040.
Procedures for connecting the power cord to standard KE-2010/2030 models.
Procedures for connecting the power cord to the standard KE-2010/2020/2040 models.
Steps for connecting the power cord to CE models of KE-2010/2030.
Comprehensive checklist for verifying leveling, connections, and smooth movement before powering on.
Adjusting caster plate position for 2-step height adjustment of the feeder exchange trolley.
Procedure for adding trolley spacers to adjust the height of the feeder exchange trolley.
