JUKI KE-2020 - Machine Leveling and Height Adjustment; Adjusting KE-2010;2020;2040

KE2000 Installation Manual
10
4. Adjusting the transport height and leveling the machine
4-1. KE-2010/2020/2040
<Procedure>
1. Detach the cover FB, cover RBC, cover RBR, and cover RBL (Fig 4-1-1).
Detach the air cap put at the end of the rail (Fig 4-1-2,Fig 4-1-3).
※For only the model KE-2030, the rail is separated into four pieces, IN buffer, IN center
station, OUT center station, and OUT buffer.
Fig ４－１－１
Fig ４－１－２
Fig ４－１－３
Cover FB
Cover RBR
Cover RBC
Cover RBL