JUKI KE-760 - User Manual

Model KE-750 / KE-760
SET -UP GUIDE
&
MAIN UNIT UNPACKING GUIDE
(Main Unit Packing Guide)
JUKI CORPORATION
ELECTRONIC ASSEMBLY &
TEST SYSTEMS DIVISION
SMT TRAINING CENTER

Summary

SET-UP GUIDE

Basic Configuration and Name of Each Part

How to Install the Main Unit

Step-by-step instructions for properly installing the main unit of the machine.

Adjusting the Transport Height and Leveling the Machine

Guide to adjusting the machine's transport height and ensuring it is level.

Connecting the Air Tubes

Procedure for correctly connecting and setting up the air tubes for the machine.

Connecting the Power Code

Guidelines for safely connecting the power code to the main unit.

Attaching Other Supplied Parts

Instructions for installing various supplied parts, including signal lights and monitors.

Interface with External Equipment

Attaching the Matrix Tray Changer (MTC)

Steps for attaching the Matrix Tray Changer (MTC) to the machine.

Checking the Machine Before Tuning on the Power

Essential checks to perform on the machine before turning on the power.

Adjusting the Height of the Replacement Table (Optional)

Head Unit Preparation and Packing

X-Y Unit Handling and Packing

Board Transport Unit Packing

ATC (Auto Tool Changer) Unit Preparation

VCS (Vision Centering System) Unit Packing

JUKI KE-760 Specifications

General

Number of nozzles	6
Motor Power	1.5 kW
Mounting tact	0.08 sec/chip
Power supply	AC 220V, 50/60Hz
Air supply	0.49 MPa (5 kgf/cm²)