- 11
7. HOD (Handheld Operating Device) Box
See the HOD box packing assembly (E53027000A0) to pack the HOD box.
8. Vision Monitor
Repack only the monitor in the carton box which the manufacturer specified.
q Do not disassemble the stand part from the mounter main unit.
w Put air cap in the carton box when there is any gap in the
carton box after repacking the monitor.
e Paste an adhesive tape whose width is 50 mm over the
carton box after repacking the monitor to close the carton
box.
CAUTION
!
Carton
Monitor
Stand part
Figure 8.1
Figure 8.2
To Next Page
