JUKI KE-2020 - Board Transport Unit Handling; Transport Rail Packing Removal

KE2000 Installation Manual
20
7. Board transport unit

7-1.Detachingthepackingmaterialsfromthetransportrail
Peel off the filament tapes fixing the rail M and rail F, and detach the air cap put at the center
of the transport rail.

Fig ７−１−１

7-2.DetachingthepackingmaterialsfromtheBUtable











 Fig ７−２−１ 
    

WARNING 
 
To prevent the body from injury which can be caused by
accidental activation of the machine , cut off the power to the
machine before starting to work.
Filament tape
※ For only the model KE-2030,
the rail
is separated into four pieces, IN
buffer, IN center station, OUT center
station, and OUT buffer.
※
Keep the components from contact
with the sensors.
Peel off the filament tapes
fixing
the BU table.
※
Two BU tables are provided
only on the model KE-2030.
Filament tape