– 14 –
18. Height and lateral position of presser foot
[Checking items]
1
Throat plate
2
Presser foot
* Raise the presser foot using the lifting lever, and check that the dis-
tance between the top surface of throat plate
1
and the presser foot
2
sole is 5.0 ± 0.2 mm
A
.
* Check that the presser foot
2
is parallel to the feed dog slot in the
throat plate
1
.
[How to perform adjustment]
○ Raise the presser foot by lifting the lever.
○ Loosen the setscrew
B
of the presser bar guide bracket.
○ Move the presser bar
C
up or down and turn it to perform adjust-
ment.
○ Tighten the setscrew
B
.
C
B
2 1
A
Measure the height of presser foot
in the state that the presser foot
sole is parallel to the throat plate.
To Next Page
Loading...
Need help?
General
