3
2
N
Adjusting the cutting width:
How to use the needle plate
- The stitch length can be adjusted
from 1 to 4 mm.
- Higher number = longer stitch,
lower number = shorter stitch.
- Basic stitch length = N.
- The cutting width should be
adjusted according to the type of
fabric being sewn. Check the seam
each time and adjust the cutting
width accordingly.
- Open cloth plate cover
- Turn cutting width dial:
- Clockwise to move knife to the left
(for heavier fabrics).
- Counter-clockwise to move the
knife to the right (for lighter fabrics).
Switch the lever to select the
regular or rolled hem and narrow
hem sewing. “N" for regular sewing.
"R" for rolled and narrow hem
sewing.
Adjustments and
settings
Stitch length
Cutting width
lever
lever
To Next Page
Loading...
