JUKI MO-6700D Series - 3. STANDARD ADJUSTMENT; (7) Positioning the upper looper holder

– 12 –
(7) Positioning the upper looper holder
Model
MO- 6704D - 0E to 0F - 4 H 48.2
MO- 6714D - BB6 to BE6 - 30P 47.3
BD4 to BE4
BD6 to BE6
MO- 6716D - - 30P 46.2
D
F
MO- 6714D - - 4 H 48.4
Dimension
F
The distance between the bottom surface of the frame and the upper end of the upper looper holder pin
should be as shown below when the upper looper holder is at the highest point of its stroke.
(Unit : mm)
Bottom surface of frame
53mm
F
0.2mm
0.2mm
MO- 6716D - - 4 H 48.2
Standard Adjustment
1-needle overlock
machine
2-needle overlock
machine
Safety stitch
machine