To Next PageTo Next Page
Need help?Do you have a question about the JUKI MS-1261/V045 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | MS-1261/V045 |
| Category | Sewing Machine |
| Language | English |
Defines danger, warning, and caution levels for machine operation.
Explains visual warning symbols and labels used on the machine.
General guidelines to read the manual, use safety goggles, and consult a doctor if using a heart pacer.
Instructions on verifying, replacing, and maintaining safety devices and labels.
Warning against using the machine for unintended purposes or modifying it.
Emphasizes operator training and education for safe operation.
Lists operations requiring the power to be turned off for safety.
Measures to prevent falling or dropping during lifting and moving.
Procedure to unpack the machine safely and check for damage.
Steps for installing machine components like table, stand, cables, and motor.
Guidelines for using JUKI genuine oil/grease and handling accidental contact or swallowing.
Precautions for repair, adjustment, cleaning, and fuse replacement by qualified personnel.
Conditions for safe operation regarding noise, voltage, temperature, humidity, and lightning.
Checks to perform before initial use, cleaning, oiling, and voltage confirmation.
Lists the different models covered by the manual (MS-1261/V045, etc.).
Describes the intended use for different models (heavy-to-extra-heavy, medium-to-heavy).
Lists the compatible needle gauges for the specified models.
Provides equivalent continuous emission sound pressure levels for workstations.
Steps for attaching the machine head to the table and ensuring it's level.
Instructions for installing the belt cover, V-belt, and related covers.
How to adjust belt tension using motor height for proper sag.
Instructions for assembling the thread stand device and fixing its bracket to the table.
Steps to mount the knee lifter base and assemble the vertical shaft.
How to add oil to the machine before first use or after long storage.
Procedure for draining collected oil from the reservoir and bed.
How to choose and correctly insert the needle into the needle clamp.
Illustrates the correct path for threading all needles and loopers.
How to adjust needle thread tension using tension nuts.
How to adjust looper thread tension using adjusting knobs.
How to adjust presser foot pressure using the regulator.
Steps to set stitch length on the sewing machine main unit.
How to adjust the feed amount of the cloth puller for stitch length.
Adjusting the gap between the needle and looper for correct operation.
Adjusting the vertical position of the needle guard.
Ensuring equal clearance between respective needles and loopers.
Adjusting the position of the looper thread cam for thread drawing.
Aligning thread guides for cotton thread and standard use.
How to adjust the feed dog height relative to the throat plate.
Adjusting tension release timing based on presser foot lift.
Adjusting the position of the take-up lever guide and tension control lever.
Adjusting the releasing lever to be parallel to the thread.
Adjusting the thread guide for a straight thread path.
Table showing relations between motor pulley, handwheel, and sewing speed.
Adjusting feed amount and setting the VO device screw position.
Adjusting the timing relation between the sewing machine and the cloth puller.
How to adjust the feed amount using the adjusting screw and rod.
Adjusting the pressing pressure of the cloth puller roller.
Setting clearance between the roller and throat plate based on roller type.
Setting the longitudinal position of the roller relative to the feed dog.
How to replace the feed dog for different material weights.
Steps to replace the throat plate for different material weights.
Adjusting presser foot height by replacing spacers.
Replacing the needle thread guide for medium-weight materials.
