JUKI MS-1261/V045 - 14. TIMING TO RELEASE THE NEEDLE THREAD TENSION; Needle Thread Tension Release Timing; 15. ADJUSTING THE TAKE-UP THREAD TENSION CONTROL LEVER; Take-Up Thread Tension Control Lever Adjustment

– 8 –
7mm
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
14. TIMING TO RELEASE THE NEEDLE THREAD TENSION
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
15. ADJUSTING THE TAKE-UP THREAD TENSION CONTROL LEVER
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
16. POSITION OF THE INTERMEDIATE THREAD TENSION RELEASING LEVER
AND THREAD GUIDE OF THE NEEDLE THREAD TENSION CONTROLLER
3mm
MS-1261/V045
MS-1261/V046
0mm
MS-1261M/V045
MS-1261M/V046
[]
[]
(
0 mm for MS-1261M/V045
,
MS-1261M/V046
)