JUKI SC-120 User Manual

Example1) Withthe setting in Fig. 44, stitchingwillnot be done in the reverse direction.
b)
C)
a) The pitch is too small in
(>
c
t
the first stitch in the
reverse direction.
— These situations can
" I
> <
' I
' b) The needle enters one
occur when the
"/
(
J
point twice.
backstitching speed
II 1
c) There is one stitch too
is increased.
\t
(
\l
many in the forward
<
r
direction. _
Fjg. 4-12
If situation a), b) or c) above occurs, reset so that the reverse feed solenoid will be actuated faster
(— direction).
Example 2) With the setting in Fig.
44 stitching is not done in the forward direction.
Fig. 4-13
a) The pitch is too small on the 4th stitch in the
forward direction.
b) The needle enters the same point twice.
c) There is one stitch too many in the reverse
direction.
Situations a), b) and c) can occur when the reversestitching speed is too slow. In such a case reset
so that the reverse feed solenoid will be actuated later (+ direction).
- 41 -
From the library of: Superior Sewing Machine & Supply LLC

JUKI SC-120 Specifications

General

Brand	JUKI
Model	SC-120
Category	Sewing Machine
Language	English