– 31 –
72 Function of Speed limitation is performed at the time of start-up of the sewing machine 0 to 5 41
limitation of (excluding the start of sewing).
acceleration at It is effective when operating inching sewing.
the start of
rotation
73 Retry function This function is used when needle cannot pierce materials . 0/1 41
0 : Normal
1 : Retry function is provided.
75 Rotating Normal rotating direction of motor 0/1 43
direction of 0 : Clockwise
motor 1 : Counterclockwise
76 Function to Starting curve of the sewing machine is selected. 0/1 42
select the start- 0 : Normal curve
up speed of the 1 : More sharp curve
sewing machine
87 Function of Pedal curve is selected. (Improving pedal inching operation) 0/1/2 42
pedal curve
selection
89 Tension Not used 0/1 36
release
function
91 Function of Function of compensating stitching when turning handwheel by hand at the 0/1 43
prohibiting time of completion of constant-dimension stitching
compensation 0 : Function of compensating stitching is effective.
operation after 1 : Function of compensating stitching is prohibited.
turning
handwheel by
hand
92 Function of Function to reduce speed at the time of completion of reverse feed stitching 0/1 41
reducing speed at the start of sewing.
stitching at the 0 : Speed is not reduced.
start of sewing 1 : Speed is reduced.
93 Function added Operation of needle up/down compensating switch is changed after turning 0/1 42
to needle up/ ON the power or thread trimming.
down compen- 0 : Normal (needle up/down compensating stitching only)
sating switch 1 : One stitch compensating stitching is performed only when aforementioned
changeover is made. (Upper stop / upper stop)
94
Continuous In IP-100 program functions, a function that does not stop the sewing machine 0/1 42
stitching + one- by combining continuous stitching with one-shot stitching when the step is
shot stitching changed.
non-stop function 0 : Normal (The sewing machine stops when a step is completed.)
1 : The sewing machine does not stop when a step is completed and
proceeds to next step.
96 Max. number of Max. number of rotation of the sewing machine head can be set. 50 to MAX 42
rotation setting * Setting varies in accordance with resistance pack to be connected. (r.p.m.)
100 Number of Not used 0 to 2 36
stitches of
tension release
motion at the
sewing start
101 Sewing This function selects the input destination of the sewing counter. 0/1 42
counter input 0 : Every time thread trimming is performed, the counter automatically
function counts up.
1 : The counter counts up by inputting of the external sewing counter SW
104 PWM when Not used. (Do not change the set value.) 30 to 200
start of
rotation is
locked
105 Touch back When the IP-100 is connected and a corner pattern is selected, this function 0/1 44
switch 1 needle provides the capability of stitch compensation during in-cornersewing with
compensation the aid of a touch back switch.
function 0: OFF Compensation sewing disabled with the touch back switch
1: ON Compensation sewing enabled with the touch back switch
* Setting is possible only if LH-4168 or LH-4188 is selected for the machine
head.
104
40
87
0
No. Item Description Setting range
76
0
89
0
91
1
92
0
93
0
94
0
96
4000
100
0
101
0
72
0
Indication of Ref.
function setting page
73
0
75
0
Number of rotations
2
0
Pedal stroke
1
105
0
To Next Page
Loading...
Need help?
General
