EasyManuals Logo

JUKI TL-2000Qi User Manual

JUKI TL-2000Qi
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Name and Function of each component / Nombre y función de cada componente /
Nomenclature et fonction des pièces
8
Assemble auxiliary table to sewing machine body.
Acople la mesa auxiliar al cuerpo de la máquina de coser.
Assembler la table auxiliaire au corps de la machine à cou-
dre.
Open legs of auxiliary table until they stop securely at the
stopping position.
Abra las patas de la mesa auxiliar hasta que se detengan rme-
mente en la posición de parada.
Déplier les pieds de la table auxiliaire jusqu’à ce qu’ils se blo-
quent de façon sûre en position d’arrêt.
1
2
Installing the auxiliary table
Instalación de la mesa auxiliar
Installation de la table auxiliaire
Adjust the height of legs so that the top surface of auxiliary
table is the same height of sewing machine body.
Ajuste la altura de las patas de modo que la supercie supe-
rior de la mesa auxiliar quede a la misma altura que el cuer-
po de la máquina de coser.
Ajuster la hauteur des pieds de sorte que la surface supé-
rieure de la table auxiliaire soit à la même hauteur que le
corps de la machine à coudre.
3
Open the cover of the auxiliary table when replacing the
bobbin thread.
Abra la cubierta de la mesa auxiliar cuando reemplace el
hilo de la bobina.
Ouvrir le couvercle de la table auxiliaire lors du remplace-
ment du l de canette.
4

Table of Contents

Other manuals for JUKI TL-2000Qi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUKI TL-2000Qi and is the answer not in the manual?

JUKI TL-2000Qi Specifications

General IconGeneral
Maximum Sewing Speed1, 500 stitches per minute
Weight25.4 lbs
LED LightYes
Automatic Needle ThreaderYes
Extension TableIncluded
Needle Up/Down ControlYes
Thread Tension ControlManual
Foot ControllerYes
Knee LifterYes
Power Requirements120V
NeedleHAx1 (130/705H)
Presser Foot LiftMax 12mm

Related product manuals