Jula 90 Falcon - Page 63

ENGLISH
63
9. Release the relay
cabling (2).
10. Release the
solenoid
cabling (1).
11. Release the
solenoid cabling
(2).
12. Release the earth
cable.
13. Remove the fuel
line.
14. Disconnect the
ignition cable
from the spark
plug.
15. Undo the screws
for the carburettor
air intake pipe.
16. Remove the
carburettor.
17. Release the bolt for
the gearstick.
18. Remove the
gearstick.
19. Remove the
screws to the rear
motor housing
(left-hand side).
20. Release the bolt
for the gearstick.
21. Release the chain
drive bolts.
22. Remove the
lock plate.
23. Remove the chain
drive (1).
24. Remove the
chain drive (2).