Check the valve clearance.
Check the condition of the spark
plug.
Adjust the electrode gap and clean.
Replace if necessary.
(more often in wet or dusty conditions)
Check the idling speed and start
function.
Cylinder head
cover
ventilation
system
Inspect the ventilation pipe/system
for cracks and other damage.
Tighten retaining parts if
necessary.
Replace seals if necessary.
Inspect the fuel line for cracks and
other damage.
Check the oil level every week.
Change (the oil should be hot when
emptying).
Check function and brake fluid
level.
Check for loose or damaged
bearings. Replace defective parts.
Check specific weight of fluid.
Check that the ventilation hose fits
properly.
Check the fluid level.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com