ED
27
Cleaning
For cleaning the bath tank and the immersed parts of the
circulator, use low surface tension water (e.g., soap suds).
Clean the outside of the unit using a wet cloth and low surface
tension water.
The circulator is designed for continuous operation under
normal conditions. Periodic maintenance is not required.
The tank should be filled only with a bath fluid recommended
by JULABO. To avoid contamination, it is essential to change
the bath fluid from time to time.
Repairs
Before asking for a service technician or returning a
JULABO instrument for repair, please contact an
authorized JULABO service station.
When returning the unit:
• Clean the unit in order to avoid any harm to the service
personnel.
• Attach a short fault description.
If you intend to return your JULABO unit to us, you will find
a Service Return Form on our website www.julabo.de
.
Please use this as a delivery note and include it to the unit
or send it in advance either by Fax or E-Mail.
• When returning a unit, take care of careful and adequate
packing.
• JULABO is not responsible for damages that might occur
from insufficient packing.
JULABO reserves the right to carry out technical
modifications with repairs for providing improved performance
of a unit.
To Previous Page
Loading...
