ED
5
2. Operator responsibility – Safety recommendations
The products of JULABO Labortechnik GmbH warrant a safe operation if installation,
operation and maintenance is carried out according to common safety regulations. This
section informs you about potential dangers that may arise from operating the
circulator and also mentions the most important safety precautions.
Persons:
The operator is responsible for the qualification of the personnel operating the units.
The operator should be constantly informed about the dangers involved with their job
activities as well as preventive actions.
Make sure all persons expected to carry out operation, installation and maintenance of
the unit read and understand the safety information and operating instructions.
If you have any questions concerning the operation of your unit or the information in
this manual, please contact us!
Contact:
JULABO Labortechnik GmbH
Eisenbahnstraße 45
77960 Seelbach / Germany
07823 / 51-0
07823 / 2491
| info@julabo.de
Þ www.julabo.de
Handling:
Nevertheless, avoid strikes to the housing, vibrations, damages to the keypad foil
(keys, display) or contamination.
Make sure the product is regularly checked for proper condition.
Regularly check (at least every 2 years) the proper condition of the mandatory,
warning, prohibition and safety labels.
Take care that the mains supply features a low impedance to avoid any negative
affects on the instrument being operated in the same mains.
This unit is designed for operation in a controlled electromagnetic environment. This
means that transmitting devices (e.g. cellular phones) should not be used in the
immediate vicinity.
Magnetic radiation may influence other units with components susceptible to
magnetic fields (e.g. a monitor). We recommend to keep a minimum distance of 1
m.
Permissible ambient temperature: max. 40 °C, min. 5 °C.
Permissible relative air humidity: 50 % (40 °C).
Do not store in an aggressive atmosphere. Protect from contaminations.
Do not expose to sunlight.
To Next Page
Loading...
