To Next PageTo Next Page
Need help?Do you have a question about the Julabo FC600 and is the answer not in the manual?
General| Brand | Julabo |
|---|---|
| Model | FC600 |
| Category | Air Conditioner |
| Language | English |
Provides a detailed description of the recirculating cooler's components and functionality.
Covers operator safety, appropriate use, and operational guidelines for the unit.
Outlines regulations and methods for environmentally friendly disposal of the unit.
Details compliance with European guidelines and the product's warranty terms and extension.
Lists key technical data including temperature ranges, capacity, power, and dimensions for various models.
Clarifies the meaning of different warning symbols and signal words used in the manual.
Explains the purpose of "Note!" and "Important!" indicators for user guidance.
Provides essential safety guidelines for connecting, operating, and maintaining the unit.
Identifies and describes the main physical controls and indicators on the unit's front panel.
Explains the MULTI-Display indications and the function of the status, control, and mode indicator lights.
Details the function of keys for actual values, setpoints, and special functions like PID parameters.
Describes the interface ports, connectors, and rear panel connections for various functions.
Guides on proper installation, placement, and initial setup before operating the unit.
Explains the setup and function of the return flow safety device to prevent backflow.
Recommends suitable bath fluids and tubing, with cautions for their use and maintenance.
Details the step-by-step process for filling the unit and activating the pump, and for draining it.
Covers the procedure for powering on the unit and initiating its operation sequence.
Explains how to activate or deactivate the AUTOSTART function for different start-up behaviors.
Guides on setting working temperatures, safety limits, and the feed/return flow control ratio.
Details how to adjust PID control parameters (Xp, Tn, Tv) for optimal temperature regulation performance.
Lists common error codes (E01-E05, E17-E19) and their corresponding malfunctions.
Covers additional error messages like E_56 and general warnings related to input values.
Explains the function and wiring of the stand-by input and the potential-free alarm output terminals.
Details the serial interface (RS232) pinout, correspondence, and the control connector for safety devices.
Guides on establishing PC communication, command format, and transfer sequences for remote operation.
Provides a comprehensive list of commands for controlling the unit and describes status message meanings.
Lists and explains various error messages encountered during operation or communication.
Explains how to enter and exit the configuration or calibration level of the unit's menu system.
Details how to set parameters like operating mode, handshake, parity, baud rate, and stand-by input.
Provides instructions for cleaning the exterior and internal components of the recirculating cooler.
Guides on contacting service personnel, fault reporting, and returning the unit for repair.
