A
Adam MartinAug 2, 2025
What to do if Julabo Fan shows a low level alarm?
- JJack StewartAug 2, 2025
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
To Next PageTo Next PageWhat to do if Julabo Fan shows a low level alarm?
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
What to do if tube breakage occurred in Julabo Fan?
If tube breakage has occurred in your Julabo Fan (due to insufficient bath fluid caused by pumping-out), replace the tubing and refill the bath liquid.
What to do for configuration error on Julabo Fan?
Press the key for a non-recurring, automatic change of the configuration.
Outlines user duties for safe operation and adherence to regulations.
Clarifies the meaning of safety warning symbols and signals.
Identifies and explains the front and rear controls of the circulator.
Provides instructions for proper unit placement and ventilation.
Details how to safely connect the unit to a power source.
How to set a single temperature setpoint directly.
Details the setting and function of over-temperature safety.
Explains the early warning and shutdown for low fluid levels.
Guides through calibrating temperature accuracy.
Provides guidance on identifying and resolving common issues.
Lists common error codes and their meanings for diagnostics.
General
