To Next Page
T
Tyler McguireAug 8, 2025
What to do if Julabo Fan shows a low level alarm?
- DDarren HallAug 8, 2025
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
What to do if Julabo Fan shows a low level alarm?
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
What to do if tube breakage occurred in Julabo Fan?
If tube breakage has occurred in your Julabo Fan (due to insufficient bath fluid caused by pumping-out), replace the tubing and refill the bath liquid.
What to do for configuration error on Julabo Fan?
Press the key for a non-recurring, automatic change of the configuration.
Technical data and specifications for various JULABO circulator models.
Provides essential safety recommendations for connecting and operating the unit.
Identifies and describes the front and rear panel controls and connections of the circulator.
Instructions for placing the unit on a stable surface, ventilation, and initial setup after transport.
How to connect the circulator for temperature control of external systems.
Guidelines for safe power connection, including earthing and voltage checks.
Steps for turning the unit on, performing self-tests, and starting/stopping operation.
Setting and function of the independent excess temperature protection.
Configuration options for 3-setpoint mode, remote control, autostart, and factory reset.
Procedure for absolute temperature calibration to ensure accuracy.
Selecting the calibration type and defining temperature points for calibration.
Lists common error codes, their meanings, and recommended actions for troubleshooting.
Explains data transfer, commands, and sequences for PC communication.
General
