L
Lisa BarrettAug 8, 2025
What to do if Julabo Fan shows a low level alarm?
- CChristina PriceAug 8, 2025
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
To Next PageTo Next PageWhat to do if Julabo Fan shows a low level alarm?
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
What to do if tube breakage occurred in Julabo Fan?
If tube breakage has occurred in your Julabo Fan (due to insufficient bath fluid caused by pumping-out), replace the tubing and refill the bath liquid.
What to do for configuration error on Julabo Fan?
Press the key for a non-recurring, automatic change of the configuration.
Detailed specifications for various circulator models, including temperature range, dimensions, power, and capacity.
Provides crucial safety advice for connecting, installing, and operating the unit safely.
Details the front and rear views of the circulator, identifying all buttons, indicators, and connectors.
Identifies controls and connections for the cooling machine, including switches, sockets, and ports.
Provides instructions for placing and setting up the unit, including ventilation and spacing requirements.
Recommends suitable bath fluids, discusses water quality, and warns against incompatible fluids.
Provides instructions and precautions for filling the bath tank and draining bath fluids.
Explains the procedure for switching the circulator and cooling machine on and off.
Explains how to directly set a single working temperature and perform adjustments.
Explains the independent excess temperature protection system, its settings, and activation.
Explains the process of Absolute Temperature Calibration for accurate temperature readings.
Lists error codes that result in a complete shutdown of the heater and pump.
General