E
evansjoannaAug 8, 2025
What to do if Julabo Fan shows a low level alarm?
- JjakesinghAug 8, 2025
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
To Next PageTo Next PageWhat to do if Julabo Fan shows a low level alarm?
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
What to do if tube breakage occurred in Julabo Fan?
If tube breakage has occurred in your Julabo Fan (due to insufficient bath fluid caused by pumping-out), replace the tubing and refill the bath liquid.
What to do for configuration error on Julabo Fan?
Press the key for a non-recurring, automatic change of the configuration.
Overview of the circulator's features, controls, and technology.
Detailed technical data for various JULABO circulator models.
Guidelines for correctly installing the circulator unit.
How to directly set a single target temperature for the circulator.
Configuration and function of the excess temperature safety shutdown.
How the system warns about low fluid levels and prevents damage.
Configuring the transition from warning signals to automatic shutdown.
Setting and function of warnings for temperatures exceeding or falling below limits.
Procedure for calibrating the temperature sensor for accuracy.
General