A
Adam KeithAug 8, 2025
What to do if Julabo Fan shows a low level alarm?
- SSteven SmithAug 8, 2025
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
To Next PageTo Next PageWhat to do if Julabo Fan shows a low level alarm?
If your Julabo Fan displays a low level alarm, switch the unit off using the mains switch, refill the bath fluid, and then switch it back on.
What to do if tube breakage occurred in Julabo Fan?
If tube breakage has occurred in your Julabo Fan (due to insufficient bath fluid caused by pumping-out), replace the tubing and refill the bath liquid.
What to do for configuration error on Julabo Fan?
Press the key for a non-recurring, automatic change of the configuration.
Overview of circulator operation, microprocessor technology, PID control, ATC3, RS232, alarm output, and pump capacity.
Detailed technical data for various JULABO circulator models, including temperature range, dimensions, and power requirements.
Essential safety practices for connecting, installing, and operating the unit.
Details the front and rear views of the circulator, including controls and connections.
Guidance on proper installation of the circulator, including placement, ventilation, and initial setup after transport.
How to set and adjust a single target temperature directly via the keypad.
Configuration and function of the excess temperature protection system for safety shutdown.
Describes the two-stage low level warning and shutdown system, including refill instructions.
Adjusting the pump capacity and flow rate for different internal or external applications.
System configuration options including 3-setpoint mode, remote control, and autostart.
Adjusting PID control parameters like Proportional range (Xp), Reset time (Tn), and Lead time (Tv).
Compensating temperature differences by calibrating the sensor against a reference point.
How the circulator operates in remote mode, PC commands, and transfer sequences.
General