M
Mary DicksonAug 13, 2025
What to do if my Julabo Air Conditioner pump is disconnected?
- CcourtneyjensenAug 13, 2025
If the pump is disconnected, turn the unit off with the mains switch and eliminate the malfunction.
What to do if my Julabo Air Conditioner pump is disconnected?
If the pump is disconnected, turn the unit off with the mains switch and eliminate the malfunction.
What to do if my Julabo Air Conditioner compressor is disconnected?
If the compressor is disconnected, turn the unit off with the mains switch and eliminate the malfunction.
What to do if my Julabo Air Conditioner heater is disconnected?
If the heater is disconnected, turn the unit off with the mains switch and eliminate the malfunction.
Why is my Julabo Air Conditioner showing a low temperature alarm?
The low temperature alarm on your Julabo Air Conditioner can be caused by a defective sensor. Specifically, the values reported by the safety sensor and the sensor in the feed connector differ by more than 25 K.
What to do if Julabo FC1200S pump is disconnected?
If the pump is disconnected, turn the unit off with the mains switch, and eliminate the malfunction. If the unit cannot be returned to operation, contact an authorized service station.
What to do if Julabo Fan heater is disconnected?
If the heater is disconnected, turn the unit off with the mains switch, and eliminate the malfunction. If the unit cannot be returned to operation, contact an authorized service station.
What to do if Julabo Fan compressor is disconnected?
If the compressor is disconnected, turn the unit off with the mains switch, and eliminate the malfunction. If the unit cannot be returned to operation, contact an authorized service station.
Why Julabo FC1200S Fan shows incorrect/invalid entry?
If you see an incorrect or invalid entry, where the value is too small or too large, or a function is not available, it could be because under menu item E[_]Sb the parameter is set to 1, and the connection between Pin 2 and Pin 3 of the standby connector is interrupted.