Operator responsibility – Safety recommendations
6
Operation:
Only qualified personnel is authorized to perform configuration, installation,
maintenance and repairs of the circulator.
Routine operation can also be carried out by untrained personnel who should however
be instructed by trained personnel.
Use:
The bath may not be filled with flammable materials. Fire hazard!
Only use recommended materials (bath fluids). Only use recommended materials (bath
fluids). Only use non-acid and non corroding materials.
When using hazardous materials, the user must attach the enclosed safety labels to
the front of the unit so they are well visible:
Warning label W00:
Colors:
yellow, black
Danger area.
Attention! Observe instructions.
(operating manual, safety data sheet)
Mandatory label
M018
Colors: blue, white
Carefully read the user information prior to
beginning operation
Scope: EU
Semi S1-0701
Table A1-2 #9
Carefully read the user information prior to
beginning operation
Scope: NAFTA
Particular care and attention is necessary because of the wide operating range.
There are thermal dangers: Burn, scald, hot steam, hot parts and surfaces that can be
touched.
Warning label W26:
Colors: yellow, black
Hot surface warning.
(The label is put on by JULABO)
Observe the instructions in the manuals for instruments of a different make that you
connect to the circulator, particularly the respective safety recommendations. Also
observe the pin assignment of plugs and technical specifications of the products.
To Next Page
Loading...
